Changzhou DLX Alloy Co., Ltd.
1. We are able to design and develop products based on customer needs, and meet customer requirements by providing appropriate engineering drawings or samples. 2. We can provide the product within one
Add to Cart
Nickel Based Welding Wire
ERNiCrMo-3, a Nickel-Chromium-Molybdenum alloy with low Carbon and Niobium addition, has superior resistance to high temperature effects such as oxidation and carburization as well as to a wide range of corrosive environments of unusual severity, especially resistance to pitting and crevice corrosion. Typical applications for inconel 625 are seawater applications, aerospace components, chemical processing equipment, nuclear water reaction components.
Alloy 625 Grade 2 is recommended for components that require optimum resistance to creep or rupture. Fine-grained (annealed) material may be advantageous at temperatures up to 1500°F with respect to fatigue strength, hardness, and tensile and yield strength.
Welding of Inconel 625
Any traditional welding procedures can be used to weld Inconel 625 to similar alloys or other metals, such as gas tungsten arc welding(GTAW), plasma arc welding (PAW), metal inertia gas welding (MIG) and so on. Before welding, remove scale, grease, mark and imprint. And no heat treatment needed before and after welding. Recommend filler wire regarding welding Inconel 625: ERNiCrMo-3
Nickel welding wire Nickel welding wire Nickel welding wire Nickel welding wire Nickel welding wire
| ErNiCrMo-3 Deposited Chemical Composition % (Typical) | ||
| C = 0.09 | Si = 0.12 | Ni = Balance |
| Mn = 0.05 | Cr = 21.9 | Nb/Ta = 3.65 |
| Fe = 0.62 | Mo = 8.70 | |
elding Wire Nickel Welding Wire Nickel Welding Wire
Size we could offer
| MIG | (15kg/spool), | Size |
| 0.8 1.2 2.4 3.2mm | ||
| TIG | (5kg/box),Strip |
Application
ERNiCrMo-3 (NA625) is used primarily for gas tungsten and gas metal arc and matching composition base metals. It is also used for welding Inconel 601 and Incoloy 800. It can be used to weld dissimilar metal combinations such as steel, stainless steel, Inconel and Incoloy alloys.
| Deposited All Weld Metal Properties % (AW) | |
| Tensile Strength | 114,000 psi |
| Yield Strength | 66,000 psi |
| Elongation | 35% |